Insys Electrical & Controls LLP

ESBEE LED Push Button Flush Head 22.5 mm 240 VAC White: Flush‑head LED push button, rated 240 VAC which is very similar specification to 250 V AC.

ESBEE Push Button Station Red & Green 1NO+1NC EP2FAH0201: Two‑colour station (red & green) which can be used in elevator control panel.

ESBEE Push Button Station: Generic push‑button station from ESBEE; likely includes variants rated for elevator use.

ESBEE Weatherproof Emergency Push Button, Metal: More of an emergency push button rather than standard elevator call button, but same brand and build quality.

AC 125/250 V Push Button Switch: Generic switch rated for 250 V AC, confirming the feasibility of that voltage range.

ESBEE Push Button – Elevator, 250 V AC: A listing explicitly stating “For Elevator, 250 V AC” from distributor website.

ESBEE Push Button Station (Elevator Spec): Another station variant specified for elevator application.

ESBEE Elevator Push Button, 250 V AC: Re‑use of generic station but context set for elevator at 250 V AC

ESBEE Pro LED Indicator 22 mm Panel (Set of 4 Colours): A set of 4 panel‑mount indicators in red, yellow, blue, green, 22 mm cut‑out size — good for visual status diversity on control panels.

ESBEE Pro LED Indicator 22 mm Panel (Red, 240 V AC): Single‑colour red 22mm panel mount LED indicator rated for 240 V AC — suitable for mains‑level signalling.

ESBEE Pro LED Indicator 22 mm Panel (Blue, 240 V AC): Similar form and rating as above, but blue colour for differentiation (e.g., QA status, non‑standard alerts).

ESBEE Pro LED Indicator 22 mm Panel (Green, 240 V AC): 22mm green indicator rated 240 V AC — good for “normal running” status on machines.

ESBEE LED Indicator 22.5 mm 12 VAC/DC White: Lower voltage variant (12 VAC/DC) white colour, 22.5mm cut‑out — for control logic / auxiliary circuits.

ESBEE LED Indicator Pro White 12 V AC/DC: Another low‑voltage white indicator, version “Pro” with perhaps enhanced brightness or build quality.

ESBEE LED Indicator 22.5 mm 240 V AC Amber: Amber colour, 22.5mm size, rated 240 V AC — useful for warnings / standby states on panels.

The part number: SLPSS3F7

It is part of ESBEE’s SLPSS Series (plastic‑body limit switches) as listed in their catalogue. The actuator type: Adjustable offset rubber roller Ø 50 × 8 mm lever. Housing / body: Plastic housing (for this SLPSS series) with side entry cable gland. 

Contacts: 1 NO + 1 NC (typical for series listing) – the catalogue shows “1 No + 1 NC Snap Action” for many variants.

he cable entry is from the bottom, with provision for a rubber hose / conduit.The switch is “oil, water & dust proof” — useful for industrial environments. 

The contact configuration (1 NO + 1 NC) makes it flexible: you can use it for “limit reached” or “limit not reached” type logic.

Because of its IP65 rating, it’s reasonably protected from dust / splash — but not “watertight in immersion.”

The MNPSS3100GD is part of ESBEE’s MNPS Series (Micro Limit Switches). 

Specifically, the suffix “GD” indicates a green‑head button type actuator within this series.

It is designed for compact industrial applications where a micro‑limit switch is required.

Stop Switches for automobiles from Esbee are best in class. We offer two categories of stop switches for EV, i.e. EV1 and EV2 stop switches. Standing correct to its name the switch is used for the stop function. For details regarding industrial certifications, technical specification and drawings please refer to the table.

For our product to the best in market we focus on these qualities:

• Control of Quality: Every component of the product is thoroughly inspected from beginning to end, with a quality control check performed at each step. We use reliability and life cycle testing to provide the highest quality products from start to finish.
• Value For Customer: Our quality control procedures are a major source of motivation for us because we won't supply any products to clients if they don't match the industry standard for quality. For the sake of quantity, we never sacrifice any aspect of quality or development.

Part Number: EC5M01009 for “5 Way Pendant, Emergency, Up/Down Single Speed, Right/Left Single Speed”

Rated Voltage: 250 V AC / 24 V DC (as per Naresh Electrical spec sheet)Rated Current: ~6‑10 A (depending spec) Protection: IP65 for the enclosure / housing 

Operating Temperature: –20 °C to +65 °C, Storage: –30 °C to +70 °C 

Material: Tough, impact‑resistant plastic, fire‑retardant (UL94) Mechanical / Electrical Life: ~ 1 million operations for push buttons + contact blocks 

Cable Entry: Through rubber hose; supports multi-core cable (>16 coreContact Blocks: According to IEC 60947‑5‑1 standard

Product Name: Pit Switch (Elevator Pit Access / Emergency Stop)

Mounting Location: Inside elevator pit, accessible from pit door.

Operation: Manual push‑button or toggle; stops elevator car motion when activated.

Contact Rating: e.g., 220 VAC, 2.5 A (as one reference)

Construction: Metal or plastic body, often with protective cover; designed for harsh pit environment (moisture, dust).

Purpose: To ensure safety of maintenance personnel in the pit, prevent unintended motion of car.

Rugged pendant station from ESBEE with 3 push buttons, typically used for crane hoist control, machine cycle start/stop/forward, or other operator‑station applications.

Compact, hand‑held enclosure (pendant type) designed for easy operator access; built for industrial use under real factory conditions.

Likely incorporates mechanical interlock or “dead‑man” style control (common in pendant crane stations) and ensures safer control functions.

Buttons probably colour‑coded (e.g., green = run/start, red = stop, yellow/black = special function) for intuitive operator use.

Suitable for integration with hoists, cranes, conveyors, assembly machines, and other automated equipment where remote operator input is needed.